Forum


Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Noisy bottom bracket
PostPosted: Sun Jun 04, 2017 9:37 pm 
Posts: 37
Got a 2014 Boardman MTB FS PRO running a SRAM GSP BB. Got the inevitable wet weather creaking, which seems to carry on long after the trails and bike have dried out (weeks). The bike itself is only a year old and has done circa 110 miles. Looks to be English thread with an 83mm shell.

Thinking I may as well upgrade rather than get the same again, looking at Shimano options, saint or Deore? But I've been told I can only replace GXP with GXP, didn't think this would be the case though? £30-40 for a BB for this bike is fine for me, as much as a admire the bling of Hope and Chris King, I think I would want to save that upgrade for a dream bike.

Any thoughts/ideas? :)


Top
 Profile  
 
 Post subject: Re: noisy bottom bracket
PostPosted: Mon Jun 05, 2017 12:05 pm 
User avatar
Posts: 5060
You can only use a GXP one as the internal diameter of the cranks are different.

Buy either the std GXP one £ 20
http://www.chainreactioncycles.com/sram ... -prod55194

Or a slightly better Uber one £29.00
https://www.uberbikecomponents.com/cate ... m-Brackets

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: noisy bottom bracket
PostPosted: Mon Jun 05, 2017 1:55 pm 
Posts: 37
Thanks. Had looked at the Uber ones, but I think I need an 83mm and they are only 73mm?

Been toying with going 1x which would mean new crankset anyway, maybe the BB can wait until I decide what I'm doing with all of that? IT ran silently on todays ride at Danbury.


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jun 05, 2017 3:14 pm 
User avatar
Posts: 5060
The only difference in the 73mm is the length of the plastic bit. Take from the old one.
Why would it mean a change of crank going 1x ?
It's usually just removing the only rings and putting on a narrow wide chain ring? What crankset is it?

Sent from my EVA-L09 using Tapatalk

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: noisy bottom bracket
PostPosted: Mon Jun 05, 2017 4:24 pm 
User avatar
Posts: 3548
Location: essex
It states Sram s1000 on the halfords website.

It should be fine to run 1x unless it has another model on there.

Worth noting you will prob need narrow bolts if you go 1 x

--------------------------------------
Bike pics
www.pinkbike.com/u/nwmlarge/


Top
 Profile  
 
 Post subject: Re:
PostPosted: Mon Jun 05, 2017 5:10 pm 
Posts: 37
VW-surfbum wrote:
The only difference in the 73mm is the length of the plastic bit. Take from the old one.
Why would it mean a change of crank going 1x ?
It's usually just removing the only rings and putting on a narrow wide chain ring? What crankset is it?

Sent from my EVA-L09 using Tapatalk


Ah, didn't realise I could swap the plastic bit out.
Currently running S1000 dual ring. figured a single ring wouldn't bolt on properly and give chain line issues.

As I only use the granny ring which is 28T It might be nice to have a slightly easier lowest gear, without losing anything for top speed, thinking maybe 30 or 32T chainring and change the cassette. But this is just at the idea stage right now.


Top
 Profile  
 
 Post subject: Re: noisy bottom bracket
PostPosted: Mon Jun 05, 2017 5:30 pm 
User avatar
Posts: 5060
Works components do some nice cheap single rings, no need for shorter bolts as they are threaded.
http://www.workscomponents.co.uk/works- ... -809-p.asp

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron