Forum - Essex Herts MTB
http://www.essexhertsmtb.co.uk/php/forum/

Wanted - On One Carbon 456 18"
http://www.essexhertsmtb.co.uk/selling-buying/wanted-one-carbon-456-t1188.html		 Page 1 of 2
Author:  SiG60 [ Tue Sep 27, 2011 2:00 pm ]
Post subject:  Wanted - On One Carbon 456 18"
Hi,

As title suggests, looking for an On One carbon 456 18" full bike if possible

Thanks
Si
Author:  SiG60 [ Fri Sep 30, 2011 11:48 am ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Everybody can Stop Worrying about me finding a C456!

I have Bought one! :D
Author:  Laser [ Fri Sep 30, 2011 11:51 am ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Need proof were the photo
Author:  SiG60 [ Fri Sep 30, 2011 12:05 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Ok, The Money Hasn't actually been handed over yet. Picking it up tomorrow.

Here is the pic from the advert.

Image

And here is the spec:

sram x9 shifters

sram x0 rear mech

shimano xtr front mech

race face evolve xc crank set

deore xt bottom bracket

hope mono brakes with matching gold rotors,resivoir caps, piston caps and hose conectors all in gold, with goodride braided hoses.

mavic 719 wheels laced to hope pro 2 hubs in silver

sr suntour Raidon 140 mm travel forks

maxis minion dh front tyre

maxis high roller rear tyre

bontrager rl bars

bontrager racelite stem

bolt on grips

truvativ seat post

on one seat

Very Excited!!
Author:  Laser [ Fri Sep 30, 2011 12:12 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Very Excited!!

Its like Christmas eve going to be a lovely weekend too :cool:
Author:  Eccles [ Fri Sep 30, 2011 12:14 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Looks sweet! I've been looking at these so if you find one in a smaller size then I'd like to know!
Author:  SiG60 [ Fri Sep 30, 2011 12:22 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Like Christmas Eve... It sure is! lol. Now whats the best way to tell the missus?! :o

Cheers Eccles. Yes will look out for you. I haven't seen many 16" ones up for sale recently.
Author:  SiG60 [ Fri Sep 30, 2011 12:25 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
The Spec is pretty spot on. The only thing i would change at this point would be the forks. Has anybody tried the suntour Raidon forks? Any Good?
Author:  Laser [ Sat Oct 01, 2011 4:02 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Did you get out today on new ride
Author:  SiG60 [ Sat Oct 01, 2011 8:40 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Ok, so got it this morning. a few extra marks around the frame than i would have liked but its only the lacquer. to be honest if it was absolutely immaculate i would be scared to take it out.

Anyway went for a decent spin, just on the road, and it rides.....well like a bike really. ha. until you kick that is, then it takes off!!

different kind of animal to my last bike, same frame size but this thing seems massive. i really felt comfortable on it though. great ride height.

And Weirdly, i was able to do the longest wheelie on it than i have ever done. not that i base a bike on their wheelie performance, but it just felt so easy to control. Feels Big, strong but nimble.

My only grumble is that it is creeking a bit and i cant seem to get rid of it. It has a race face evolve xc crank and it seems like this maybe the problem. i noticed the crank had a bit of movement. I have taken the drive cog side off and noticed the spline has a little bit of damage but i cant see it causing a problem when its all tightened up. anyway i cleaned it all up and put it all back together. tightened it up as hard as i could but it is still creeking. It could be the BB but that seems fine. however i would like to check that it is tight. would anyone happen to have a shimano BB hollowtech spanner that they could kindly lend me?? Has any one else had this problem with there raceface cranks?

Other than that i love it! need to have a proper ride on it now.
Author:  Noel [ Sun Oct 02, 2011 3:20 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Never ridden race face, but all my cranks squeek as some stage and I just grease them and then they all good again.

I have got a tool you can borrow,not sure where you based mate.
Author:  SiG60 [ Sun Oct 02, 2011 3:30 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Hi Noel,

Thanks, will try that. I am based in Takeley. would be good to borrow if you dont mind. Dont worry if its too far away.

I will try and grease it up first and let you know.

thanks
Author:  Eccles [ Sun Oct 02, 2011 7:15 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Hollowtech 1 or 2? 2 I'd image. Surely if it's Race Face it's an ISIS tool you need?
Author:  SiG60 [ Mon Oct 03, 2011 6:59 am ]
Post subject:  Re: Wanted - On One Carbon 456 18"
This is the BB:

Image

This is the crank:

Image

Thanks
Si
Author:  SiG60 [ Wed Oct 05, 2011 12:51 pm ]
Post subject:  Re: Wanted - On One Carbon 456 18"
Ok took it to my LBS and the confirmed that the crank spline was knackered. They did say the BB was solid, so no problems there.

So. instead if hunting around for another second had item. I thought sod it and I managed to find a brand new Shimano SLX Crank for just under £100. Job done.

I bought it from a place called Rose Bikes if anyone is interested. Looks like they have some good prices.

http://www.rosebikes.co.uk/article/shimano-slx-crankset-hollowtech-ii-fc-m660/aid:287671

I also had a chat to the seller who was very apologetic and agreed to pay refund me £60 towards a new crank. which i thought was good of him.

Anyway hopefully will be able to install it before the weekend ready for an Epping thrash.
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/