| Forum - Essex Herts MTB http://www.essexhertsmtb.co.uk/php/forum/ |
|
| Chain rings http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/chain-rings-t3997.html |
Page 1 of 1 |
| Author: | nwmlarge [ Thu Feb 07, 2013 10:22 am ] |
| Post subject: | Chain rings |
Where do you guys normaly pick up chain rings i need to change some on my gf's bike but there really is no need to spend a fortune as it is not heavily used. normal black 8-9speed compatible would be fine 5 stud pattern |
|
| Author: | VW-surfbum [ Thu Feb 07, 2013 10:38 am ] |
| Post subject: | Re: chain rings |
Ebay |
|
| Author: | Eccles [ Thu Feb 07, 2013 11:12 am ] |
| Post subject: | Re: chain rings |
I just bought some from Superstar as a temporary measure as I'm planning on getting a new chainset. £37 for 3 but they're 4 hole 104 PCD. |
|
| Author: | nwmlarge [ Thu Feb 07, 2013 11:18 am ] |
| Post subject: | Re: chain rings |
What is a reasonable price for normal chain rings? the prices seem to vary a lot all my bikes are 1x9 so i have no point of reference |
|
| Author: | VW-surfbum [ Thu Feb 07, 2013 11:30 am ] |
| Post subject: | Re: chain rings |
I bought SLX middle for £18 |
|
| Author: | Eccles [ Thu Feb 07, 2013 11:37 am ] |
| Post subject: | Re: chain rings |
They do seem to be fairly expensive for what they are but some people choose Deore chainrings over SLX ones. A few grams heavier but seem to last longer. Middleburn Hardened are quiet good to and are sometimes cheaper that Shimano ones. Are you changing all the rings (3?). Is it the standard 22-32-44 setup? |
|
| Author: | nwmlarge [ Thu Feb 07, 2013 11:41 am ] |
| Post subject: | Re: chain rings |
Cool i will keep an eye on a couple of the sets on ebay while i confirm the BCD its a 48-38-28 set up on a specialized VITA for Laura. The current setup is heavily worn and while it still works at the mo as all components are as worn as each other i do want to change it out for fresh stuff. |
|
| Author: | SurferEv [ Thu Feb 07, 2013 12:03 pm ] |
| Post subject: | Chain rings |
I bought mine as Rob says as simple Deore as bullet-proof and cheap from CRC. |
|
| Author: | Eccles [ Thu Feb 07, 2013 1:03 pm ] |
| Post subject: | Re: chain rings |
Yeah I'm having to do the full swap out. Did the cassette and chain but then found the rings lost it under a lot of power, nearly wrecking my knees, they have done many many miles though. So the plan is to use cheap Superstar rings that probably won't last long and hopefully get some cash together to switch to 2 x 10 XT or something. |
|
| Author: | nwmlarge [ Thu Feb 07, 2013 2:44 pm ] |
| Post subject: | Re: chain rings |
Its annoying when gears fail as they aren't cool! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|