Forum - Essex Herts MTB
http://www.essexhertsmtb.co.uk/php/forum/

ICGS tab thread problem
http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/icgs-tab-thread-problem-t4014.html		 Page 1 of 1
Author:  decoxx [ Fri Feb 08, 2013 8:36 pm ]
Post subject:  ICGS tab thread problem
I'm afraid that I just managed to damage the thread of one of the tabs......

What do you guys think? is it an issue to have the chain guide secured by two bolts only or I'm over thinking about this?

I'm so pissed off at the mo bloody hell!
Author:  nwmlarge [ Fri Feb 08, 2013 8:39 pm ]
Post subject:  Re: ICGS tab thread problem
Get it retapped mate unless you've actually bent it?

if you don't have all three bolts on you could right chew it up with a minor collision

i have a iscg to bb adaptor if you need one ?
Author:  decoxx [ Fri Feb 08, 2013 8:48 pm ]
Post subject:  Re: ICGS tab thread problem
I'll do that then, do you think any bike shop would do it?

I got some other bolts, flatter but I knocked one of them while not fully inserted and the bloody bolt came off and damaged the thread :x :oops: :x :oops:

Thanks for the offer mate, I'll try to sort this properly first.
Author:  nwmlarge [ Fri Feb 08, 2013 8:50 pm ]
Post subject:  Re: ICGS tab thread problem
Yeah any bike shop with a half decent workshop should be able to sort it.
since the demise of daycocks i'm not sure of any others near leytonstone that would be worth asking, is ditchfields still at bakers arms?
Author:  decoxx [ Fri Feb 08, 2013 8:56 pm ]
Post subject:  Re: ICGS tab thread problem
There is Trax in Wanstead and Bike Shack will try one of them.....Ditchfields I've never heard about it, but they came up on google.
Author:  nwmlarge [ Fri Feb 08, 2013 9:04 pm ]
Post subject:  Re: ICGS tab thread problem
Ditchfields is proper proper old school i'm amazed they are still about
http://www.ditchfields.co.uk/index.html
Author:  luvinit [ Fri Feb 08, 2013 9:13 pm ]
Post subject:  Re: ICGS tab thread problem
Check ya phone deco
Author:  unityjon [ Sat Feb 09, 2013 7:03 pm ]
Post subject:  Re: ICGS tab thread problem
I've got the tools to do it if I can be of help.

Sent using the force...
Author:  decoxx [ Sun Feb 10, 2013 12:36 pm ]
Post subject:  Re: ICGS tab thread problem
I appreciate mate, I would gladly accept your help if I didn't have to travel 35 miles! :thumbup:
Author:  nwmlarge [ Sun Feb 10, 2013 7:28 pm ]
Post subject:  Re: ICGS tab thread problem
You are welcome to come up to mine I have a tap n die kit too
You get to epping and I'll pick u up
Author:  decoxx [ Sun Feb 10, 2013 7:48 pm ]
Post subject:  Re: ICGS tab thread problem
Hi mate that's great you're closer! Let me know when you're free and I'll go to yours. Thanks a lot!
Author:  nwmlarge [ Sun Feb 10, 2013 9:52 pm ]
Post subject:  Re: ICGS tab thread problem
Tomorrow evening is cool
Author:  decoxx [ Mon Feb 11, 2013 8:56 am ]
Post subject:  Re: ICGS tab thread problem
Deal! Please Pm your address and I can probably cycle to your place, cheers!
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/