Forum - Essex Herts MTB http://www.essexhertsmtb.co.uk/php/forum/ |
|
Bent front disc! http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/bent-front-disc-t4223.html |
Page 1 of 2 |
Author: | luvinit [ Thu Mar 28, 2013 12:10 pm ] |
Post subject: | Bent front disc! |
I have a 200mm avid front disc with slight bend (thanks FOD) ....now my mechanic pal says stick it in the freezer....i trust him but has this worked for you before? and b4 i get any smart arsed answers .......yes i have taken it off the hub....lol! |
Author: | nwmlarge [ Thu Mar 28, 2013 12:17 pm ] |
Post subject: | Re: bent front disc! |
It is unlikely to fix it once it thaws it will most likely go back to being bent. i'd just hunt for a new one |
Author: | Laser [ Thu Mar 28, 2013 12:38 pm ] |
Post subject: | Re: bent front disc! |
I found the two bits of wood and a club hammer didn't work for me. |
Author: | beardee [ Thu Mar 28, 2013 1:57 pm ] |
Post subject: | Re: bent front disc! |
No need for a freezer, just leave it outside. Your lbs should have a rotor truing tool |
Author: | shouldgetoutmore [ Thu Mar 28, 2013 2:35 pm ] |
Post subject: | Re: bent front disc! |
Or use a small adjustable spanner, rotate to bent section and carefully try and bend back. |
Author: | unityjon [ Thu Mar 28, 2013 2:42 pm ] |
Post subject: | Re: bent front disc! |
Find the warp then warm the whole rotor slightly with a heat lamp/ blow torch and clamp ithe warped bit in a vice, then leave it overnight so it cools very slowly, metal does a 'memory' but its pretty limited, alloy is even worse. Remember putting skyway Tuffs and ACS Z-rims in the freezer, all it did was make the alloy hubs or spokes brittle, never straightened anything ! |
Author: | luvinit [ Thu Mar 28, 2013 3:08 pm ] |
Post subject: | Re: bent front disc! |
Dunno only ever snapped my z rims never bent em!....lol! |
Author: | shouldgetoutmore [ Thu Mar 28, 2013 3:44 pm ] |
Post subject: | Re: bent front disc! |
Watch this. if you don't have a truing tool, as i said before a small adjustable spanner works. http://www.youtube.com/watch?v=nHdQkm14JVw |
Author: | Jon [ Thu Mar 28, 2013 3:56 pm ] |
Post subject: | Re: bent front disc! |
Ive had ok luck clamping them in a vice and bending with a spanner. They are never quite the same. A new one is only £13 so might not be worth spending too much time on. http://superstar.tibolts.co.uk/product_ ... cts_id=197 |
Author: | luvinit [ Thu Mar 28, 2013 4:16 pm ] |
Post subject: | Re: bent front disc! |
Guys fantastic help ........cheers jon that site only listing 180 or 203mm mine is 200mm or am i being a div! |
Author: | nwmlarge [ Thu Mar 28, 2013 5:08 pm ] |
Post subject: | Re: bent front disc! |
I'd get a 203 and then pop a spacer under the brake if needed but you will prob find it goes straight on |
Author: | kona [ Thu Mar 28, 2013 6:57 pm ] |
Post subject: | Re: bent front disc! |
Brian i have a avid 203mm you can have, £5 bargain |
Author: | luvinit [ Thu Mar 28, 2013 10:03 pm ] |
Post subject: | Re: bent front disc! |
Sweet adam mate i can come and get if you text me to let me know when your home dude! you booked that uplift yet? |
Author: | luvinit [ Sat Mar 30, 2013 5:10 pm ] |
Post subject: | Re: bent front disc! |
You was right andy it needed a spacer! |
Author: | kona [ Sat Mar 30, 2013 6:42 pm ] |
Post subject: | Re: bent front disc! |
Is it ok ? |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |