luvinit wrote:
can i just say mines not noisy its running sweet.............lol
Mine maybe is noisy but she is prettier!
| Forum - Essex Herts MTB http://www.essexhertsmtb.co.uk/php/forum/ |
|
| Voltage, Strange Noise http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/voltage-strange-noise-t4460-15.html |
Page 2 of 2 |
| Author: | unityjon [ Thu Jun 27, 2013 7:08 am ] |
| Post subject: | |
Bearings shouldn't be that tight, the key is to remove them and out then in straight and even (not one side then the other, even by a tiny amount) just use a drift through the middle, any thing you can find that will fit that you can tap firmly with a hammer. Sent from my GT-I9100 using Tapatalk 4 Beta |
|
| Author: | Mattvanders [ Fri Jun 28, 2013 7:42 am ] |
| Post subject: | Re: Voltage, Strange Noise |
I have used a correcly sized (e.g. as close fit to the hole as possible) nut and bolt (and washers) to press my BB and headset in before, a lot cheaper than a puller kit. Hammering out such items is fine as long as you take your time and perferdly use a brass drift/bar to prevent damage/spread the load. THINK TAP OUT, NOT KNOCK OUT |
|
| Author: | Jon [ Fri Jun 28, 2013 10:14 am ] |
| Post subject: | Re: Voltage, Strange Noise |
A bolt, nut, some correctly sized washers and a socket set should give you all you need to pop bearings out |
|
| Author: | nwmlarge [ Fri Jun 28, 2013 11:04 am ] |
| Post subject: | Re: Voltage, Strange Noise |
Yes deco I can help |
|
| Author: | Jon [ Fri Jun 28, 2013 3:22 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
This is the hardware needed for the Voltage 2 x 61901 (24 x 12 x T6) < main pivot 6 x 61902 (28 x 15 x T7) < host link and rocker same as the gambler - fairly standard stuff |
|
| Author: | luvinit [ Fri Jun 28, 2013 4:14 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
Can i just say mines not noisy its running sweet.............lol |
|
| Author: | decoxx [ Fri Jun 28, 2013 6:15 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
luvinit wrote: can i just say mines not noisy its running sweet.............lol Mine maybe is noisy but she is prettier!
|
|
| Author: | harkin [ Fri Jun 28, 2013 6:23 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
Mine may be noisier, but she's old and dirty lol |
|
| Author: | decoxx [ Fri Jun 28, 2013 6:52 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
But seriously now... As I don't know really what I'm doing I'll just leave it and when I have a chance or/and money I'll send it for a service. For future reference the bearing kit can be found on Ebay as well: http://www.ebay.co.uk/itm/171013246487? ... 1423.l2649 Thanks for your input guys! |
|
| Author: | decoxx [ Fri Jun 28, 2013 6:53 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
nwmlarge wrote: Yes deco I can help 5 star customer service!!!  
|
|
| Author: | MCHardmanUK [ Fri Jun 28, 2013 7:00 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
Here here with money, just spent an arm and a leg and I still need new bearings in the hubs and some bushes and a mech. |
|
| Author: | luvinit [ Fri Jun 28, 2013 8:57 pm ] |
| Post subject: | Re: Voltage, Strange Noise |
Mines newer and set up perfect....lol |
|
| Author: | AIREDFOX [ Sat Jun 29, 2013 11:00 am ] |
| Post subject: | Re: Voltage, Strange Noise |
I always use a socket that fits nicely over the top that's the same size and tap the bearing in littlely works every time for me |
|
| Page 2 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|