Forum - Essex Herts MTB
http://www.essexhertsmtb.co.uk/php/forum/

DMR V8's vs Wellgo CNC Platform B137B
http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/dmr-wellgo-cnc-platform-b137b-t4858.html		 Page 1 of 2
Author:  Azzle [ Thu Sep 19, 2013 1:11 pm ]
Post subject:  DMR V8's vs Wellgo CNC Platform B137B
Hey guys. Looking to buy some new pedals and have found a couple that fall into my price-range. So, my question is this; which would be better/last longer out of these two?

http://www.chainreactioncycles.com/dmr- ... p-prod3177
http://www.chainreactioncycles.com/well ... -prod52879
Author:  Eccles [ Thu Sep 19, 2013 1:20 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
The V8's I'd say. Easy to maintain the bearings and a proven pedal, popular for a reason. Wellgo just copy designs.
Author:  andydd [ Thu Sep 19, 2013 1:24 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Big chunky pedals are a bit old skool now as many favour the newer thinner ones, Ive got some Nukeproof Electrons (I think !), theres a big range > http://www.chainreactioncycles.com/s?q=nukeproof+pedals.

Andy
Author:  Laser [ Thu Sep 19, 2013 1:51 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Quote:
Nukeproof Electron Flat Pedals 2013
:thumbup:
My pins did start to rust on first couple of ride out but nothing to worry about.
Author:  andydd [ Thu Sep 19, 2013 1:58 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Laser wrote:
Quote:
Nukeproof Electron Flat Pedals 2013
:thumbup:
My pins did start to rust on first couple of ride out but nothing to worry about.


Cover in grease to stop that :)
Author:  unityjon [ Thu Sep 19, 2013 2:25 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
The DMR's would get my vote, had them on the Alpine, faultless. Got thin superstar nano's on the bottlerocket, can't fault those either !
Author:  Geoff43 [ Thu Sep 19, 2013 2:29 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Nuke proof electrons work for me with vans gravel trainers grip like shit to a blanket
Author:  VW-surfbum [ Thu Sep 19, 2013 3:42 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
If you can go up a bit?
http://www.moovebikeco.com/torque-flat-pedals-thru-pin
or
http://superstar.tibolts.co.uk/product_ ... cts_id=194
Author:  Eccles [ Thu Sep 19, 2013 3:45 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
The Nano's and Electrons are the same pedal, which are made be HT Components (their AN01 pedal), and also rebranded as these: http://www.carboncycles.cc/?s=0&t=2&c=84&p=940& (cheapest).
Author:  andydd [ Fri Sep 20, 2013 2:18 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Eccles wrote:
The Nano's and Electrons are the same pedal, which are made be HT Components (their AN01 pedal), and also rebranded as these: http://www.carboncycles.cc/?s=0&t=2&c=84&p=940& (cheapest).


Handy to know :)
Author:  Simon [ Mon Sep 23, 2013 7:16 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
DMR vaults mate! Bombproof :thumbup:
Author:  Laser [ Mon Sep 23, 2013 8:01 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Simon wrote:
DMR vaults mate! Bombproof :thumbup:

Yes but not Nukeproof
Author:  andydd [ Mon Sep 23, 2013 8:09 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
:high5:
Laser wrote:
Simon wrote:
DMR vaults mate! Bombproof :thumbup:

Yes but not Nukeproof
Author:  andydd [ Mon Sep 23, 2013 8:10 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Just bought some Electrons which are the cheaper and pretty light nylon version, reviews are good so we shall see.
Author:  Simon [ Tue Sep 24, 2013 8:13 pm ]
Post subject:  Re: DMR V8's vs Wellgo CNC Platform B137B
Laser wrote:
Simon wrote:
DMR vaults mate! Bombproof :thumbup:

Yes but not Nukeproof


Ok spencer, fair enough on that 1 :mrgreen:
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/