Forum


Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: XS Inbred build
PostPosted: Thu Jun 12, 2014 10:18 am 
User avatar
Posts: 740
Location: Cake shop
So the mini bug has out grown his ridgeback and it's time for a proper bike :)

Just about to pick up a XS Inbred plus wheels and other bits from a friend so that just leaves drive train and brakes.

Going for 1 by 10 to keep it simple.

Also going for a rigid carbon fork.


Cost saving on the frame and forks leaves a decent budget for the rest

Comments on this lot ;)



Shimano XT M771 10 Speed MTB Cassette
Silver, 11-36t

Now £33.49

Shimano XT M785 Disc Brake
Black, Front - Right Hand Lever - 1000mm Hose - I-Spec B
sku255639

Now £64.49


Shimano XT M785 Disc Brake
Black, Rear - Left Hand Lever - 1700mm Hose - I-Spec B
sku255641

Now £64.49


Race Face Respond Crank Arms 2012
Black, 104mm, 165mm, 83mm BB Shell
sku158456

Now £69.99


Race Face Narrow Wide Single Chainring
Black, 104mm, 32t
sku393149

Now £40.49



Shimano XT M786 Shadow+ 10 Speed Rear Mech
Black, Long Cage
sku322085

Now £49.49


Needs:

BB
Discs
Chain

Option for oneup 42T if needed


Last edited by bugeye on Thu Jun 12, 2014 1:27 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 10:41 am 
User avatar
Posts: 463
Location: In my shed
Have a look at these..

These seem a good deal http://www.merlincycles.com/shimano-slx ... 58528.html

And this http://www.merlincycles.com/kmc-x10-93- ... 44742.html

And finally http://www.merlincycles.com/hope-stainl ... 53267.html

Also you could use medium or short cage if your running 1x10

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 10:53 am 
User avatar
Posts: 740
Location: Cake shop
I did pick a medium cage but wondered if it would work with the one up 42T ?

Just noticed the crank takes an 83mm BB which won't fit :(


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 11:01 am 
User avatar
Posts: 463
Location: In my shed
Best value I've been told by many people is SLX crankset..!!

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 11:05 am 
User avatar
Posts: 463
Location: In my shed
Not sure which of these..

http://www.merlincycles.com/shimano-slx ... 58295.html

http://www.merlincycles.com/shimano-slx ... 58858.html

Both have BB included..

Sorry I'm not to clued up on which would work as single ring.!!

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 11:14 am 
User avatar
Posts: 463
Location: In my shed
https://www.on-one.co.uk/i/q/CROOTHTH/o ... -chainring

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 11:19 am 
User avatar
Posts: 740
Location: Cake shop
Looks like the double 170mm slx crank with that on one chain ring and a bash guard will do the job :thumbup:


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 11:45 am 
User avatar
Posts: 1429
bugeye wrote:
I did pick a medium cage but wondered if it would work with the one up 42T ?


I'm running 42T one up ring with a mediem cage and its fine on the stache, on the 40T you can run a short cage but i would still go mediem for less tension

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 12:20 pm 
Posts: 1694
Martin what size is the ridgeback ?
Might be interested :)


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 12:55 pm 
User avatar
Posts: 740
Location: Cake shop
Adam...

It's an MX24 like this.... http://www.ridgeback.co.uk/bike/mx24-black#details

In good nick... serviced it a couple of months ago, new BB and brake blocks, dismantled and lubed the forks, headset and cables etc.

Couple of scuffs here and there but nothing major ( which is surprising ) ;)

Could do with a new front mech... I given up trying to adjust it to get all three gears :lolno:


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 1:30 pm 
User avatar
Posts: 1266
Location: Ockendon
I built one for my son earlier in the year - got a great deal on a Kona frame so spent some pennies on the rest.

I was going to go XT and the 1 x 10 setup with a narrow/wide but in the end went with a deore crankset and put the raceface n/w on as you have said, and then went for the trail set-up Zee.

I got some dual air rockshox at a decent price, some dtswiss rims & hubs.

Anyway, drive train never skips a beat and looks way cool.

David

--------------------------------------
Strava Profile: http://goo.gl/iSl5I


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 2:38 pm 
User avatar
Posts: 463
Location: In my shed
Just found these, Some good brake deals... If you can live with Avids ..lol

http://bikes.merlincycles.com/search?p= ... _966609_13

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 3:38 pm 
User avatar
Posts: 740
Location: Cake shop
Got any pics Stumpie... all inspiration gratefully received :)

Looks like my mate might have a raceface crank up for grabs too so that might be sorted.

I can and do live with Avids :eh: .... don't know if I could live with them on someone else's bike that I have to fix ( even if he is my son ) if you see what I mean. Part of the attraction of the XT's is fit and forget... change pads every now and then.

Matt... if I go 2 by 10 instead of the one up will the medium mech still be ok?


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 4:15 pm 
User avatar
Posts: 463
Location: In my shed
I cant stand avids :oops: ..lol

Thats the reason i got Xt's with ice tech rotors ,fit and forget..!!

I'm running 2x10 with XT medium cage, if that helps.

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: XS Inbred build
PostPosted: Thu Jun 12, 2014 4:44 pm 
User avatar
Posts: 1429
http://www.oneupcomponents.com/pages/compatibility

"What rear derailleurs are compatible with the 42T OneUp Sprocket?

The OneUp 42T sprocket is compatible with most medium or long cage 10 speed mountain rear derailleurs. We are working to populate a complete list of preferred models. As with any cassette you need to check that your rear derailleur has enough capacity.

Rear derailleur capacity = (largest rear cog – smallest rear cog) + (largest front chainring – smallest front chain ring)



Here are two examples:

1. For someone running a 1X system with a 32T front chainring and an 11-42T rear cassette:

(42-11)+(32-32)=31T capacity


2. For someone running a 2X system with 40/28 front chainrings and an 11-42T rear cassette:

(42-11)+(40-28)=43T capacity


Medium cage deraileurs can typically handle 37T (Shimano) 39T (SRAM) and long cage rear derailleurs can handle 43T (Shimano) 45T (SRAM)."

Think a long will be better but it depends on the size difference between the two rings on the crank

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 26 posts ]  Go to page 1, 2  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron