Forum


Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Tubeless setup
PostPosted: Sat Sep 19, 2015 12:08 pm 
User avatar
Posts: 1429
I went tubeless around a month and bit ago and so far loving it (main thing is running slighly less pressure to get more grip but no pinch flates), but will be changing tyres over espicial for a riding trip, can the sealent be reused/come of ut reclamed or is it better just to bit the bullet and use new full stop?

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Sat Sep 19, 2015 3:36 pm 
User avatar
Posts: 500
Location: Stanford-le-hope
If you used stans you'll probably find most of it has dried and coated the inside of the tyre. I very much doubt you'll find enough to reuse but if you do I can't see anything wrong with trying to recover and use it. But I would still put in the full amount of new sealant.

--------------------------------------
Tally ho lads over the top we go!


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Sat Sep 19, 2015 3:57 pm 
User avatar
Posts: 1429
http://www.ubyk.co.uk/wickens-soderstro ... lant/24242

Na using this stuff which is meant to last the life of a tyre (its good stuff, looks like poridge with bits of coloured rubber to block the holes)

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Sat Sep 19, 2015 11:03 pm 
User avatar
Posts: 350
I still had a puddle of sealant in my tyres when I swapped them recently so I scooped out what I could, re-bottled and threw it back in the new.


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Sun Sep 20, 2015 1:34 pm 
User avatar
Posts: 1151
Location: Harold Wood
Never seen that Matt! As said Stans dry's up !


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Mon Sep 21, 2015 2:28 pm 
Posts: 217
Location: Saffron Walden
I change mine and the team riders tyres all the time mate, sometimes twice in a race weekend and always recycle as much as I can out of the tyre that is coming off. If its still running ok you can hang the tyre up after you have taken it off and it will slowly pool in the bottom, making it easier to pour/scoop out.

--------------------------------------
GIANT TRANCE X 29er
BIRD AERIS


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Mon Oct 26, 2015 2:32 pm 
User avatar
Posts: 1151
Location: Harold Wood
Mattvanders wrote:
http://www.ubyk.co.uk/wickens-soderstrom-no-8-tyre-sealant/24242

Na using this stuff which is meant to last the life of a tyre (its good stuff, looks like poridge with bits of coloured rubber to block the holes)


This gear any good Matt?

run out of Stans!


Top
 Profile  
 
 Post subject: Re: Tubeless setup
PostPosted: Mon Oct 26, 2015 2:38 pm 
User avatar
Posts: 1429
So far so good, when i did the orginal tubeless conversion it was with old tyres. The rear had two small holes in it (that i did not know about), with a bit of sitting 'hole to ground' action the holes were soon pluged and did not cause any more problems. As for changing tyres and re-using sealant, once open i was able to save a little it of it but it really was not worth it

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron