Forum - Essex Herts MTB http://www.essexhertsmtb.co.uk/php/forum/ |
|
RaceFace BB query http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/raceface-query-t6302.html |
Page 1 of 1 |
Author: | Simon [ Tue May 26, 2015 9:31 am ] |
Post subject: | RaceFace BB query |
Hi all! Anyone running a raceface type X BB? A while back I noticed slight play on the drive side, so ordered up new bearings from CRC ( original ) popped out yesterday & noticed about 2mm play when you turn the crank in a certain position! Unnoticeable when riding & nice and smooth! Is this normal as they have a plastic cap which acts as a shim once the crack arm is fitted! ( also replaced). Did a quick search & they have mixed reviews! |
Author: | bugeye [ Tue May 26, 2015 3:15 pm ] |
Post subject: | Re: RaceFace BB query |
I'm going to go with... that doesn't sound right regardless of what make / type crank. Do you get the same 2mm movement with the cranks turned through 180 degrees from the first position .... maybe something is a bit 'oval' rather than 100% round? |
Author: | Simon [ Tue May 26, 2015 7:09 pm ] |
Post subject: | Re: RaceFace BB query |
Yep think I will have a measure up tomorrow mate! Possibly one of the cups isn't 100% true? I never really noticed it until I stripped The BB down at the start of spring! Don't like the plastic bearing caps , very flimsy and the fact that they act as shims to space out the hollow shaft! Run a Hope BB before & was all good! |
Author: | Simon [ Tue May 26, 2015 8:13 pm ] |
Post subject: | Re: RaceFace BB query |
Ok so just gave it a quick pull & you can fell the play in any position, just a little difficult to extract the play but is about 2mm on driveside ! But you still have to give it a good tug tho so maybe raceface bearings ain't to clever?!! |
Author: | bugeye [ Tue May 26, 2015 8:18 pm ] |
Post subject: | Re: RaceFace BB query |
I had a quick google earlier today and I think that might be to do with the spacers. I think you get wear on the splines that the crank arm sits on so that when you tighten it up you're still left with a bit of movement... |
Author: | bugeye [ Tue May 26, 2015 8:22 pm ] |
Post subject: | Re: RaceFace BB query |
This was the thread on STW I found.... http://singletrackworld.com/forum/topic/how-to-adjust-play-in-raceface-crankset-bb Might be a similar issue? |
Author: | VW-surfbum [ Tue May 26, 2015 9:05 pm ] |
Post subject: | |
Can they be preloaded? |
Author: | Simon [ Sat May 30, 2015 2:57 am ] |
Post subject: | Re: RaceFace BB query |
Martin that looks spot on mate, did a quick breeze through I have ordered a new crack arm seal & shim kit £5.00, it does say in small print that slight play can be expected ! so will try! it says the main concern was not crushing the bearings! |
Author: | bugeye [ Sat May 30, 2015 8:08 pm ] |
Post subject: | Re: RaceFace BB query |
Good stuff |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |