| Forum - Essex Herts MTB http://www.essexhertsmtb.co.uk/php/forum/ |
|
| Shimano XTR mount (hanger) http://www.essexhertsmtb.co.uk/mountain-bike-kit-equipment/shimano-xtr-mount-hanger-t6931.html |
Page 1 of 1 |
| Author: | Eccles [ Wed Apr 19, 2017 1:13 pm ] |
| Post subject: | Re: Shimano XTR mount (hanger) |
What's the full model number of the shifter, should start with SL- ? |
|
| Author: | Eccles [ Wed Apr 19, 2017 8:47 pm ] |
| Post subject: | Re: Shimano XTR mount (hanger) |
Ah yeah it looks like there is no separate part for that shifter according to the Shimano tech doc. That's a bit crap as a lot of their other shifter do have the top and clamp as a aftermarket replacement part. I think I have a 9spd rh XT shifter lying around but I bet the clamp from that wouldn't fit! |
|
| Author: | stumpie [ Thu Apr 20, 2017 6:28 am ] |
| Post subject: | Re: Shimano XTR mount (hanger) |
You're best off just buying a used one on eBay for that part tbh. |
|
| Author: | stumpie [ Thu Apr 20, 2017 1:43 pm ] |
| Post subject: | Re: Shimano XTR mount (hanger) |
Here are all the 'small parts' I could find: https://www.bike-discount.de/en/shop/sp ... nd-shimano What you want isn't listed there... so as you say it's probably easier to replace the complete unit - or ask if anybody here as an old one knocking about - I have loads of old SRAM bits but no Shimano 
|
|
| Author: | Eccles [ Fri Apr 21, 2017 7:54 am ] |
| Post subject: | Re: Shimano XTR mount (hanger) |
I've checked my 9spd one and there no way you'd bodge that onto your shifter. The clamp is integrated into the lower half of the shifter, not the top like on yours. Looks like XT will be the way to go. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|