Forum


Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Handlebar setup
PostPosted: Mon Jan 26, 2015 10:33 am 
Posts: 345
Probably a silly question, but what are the markings for on the Renthal bars and stem?

I have set mine up as pictured. They look right, and feel right, but from the markings on the stem and bars, it appears that I have set them at an 'extreme', or 'end of range' setting, ie, the markings on the stem are nearly out of range of the markings on the bars.

I went for a ride yesterday, then felt OK, but I'm curious to know what the setup markings are for?

Image

Image

--------------------------------------
Specialized Enduro Comp 2015


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 11:13 am 
User avatar
Posts: 5060
From the angle of the picture they look correct (ish) hard to tell without looking.
The markings on the bar all depend on what stems being used as the all have different openings so how could they possibly be correct for all stems? set it up on how it feels not only on the markings.

I moved mine on wednesday, I always "had" my bars with no real back sweep and pushed slightly forward, now moved back using all the sweep, really made a big handling difference.

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 11:30 am 
User avatar
Posts: 1429
To me they look like they could be rolled a little bit forward so that the raise section of the bar (think, grips, raise and clap as the three different areas of a bar) is at 90 degrees to the ground. there is no right or wrong way but you will be surprised by having a little play and seeing what feels better.

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 12:02 pm 
Posts: 345
That makes sense, rolling them forward a little will put the markings more 'in range' with the stem lines. The stem is a Renthal Apex, 70mm. The Bars are 20mm rise.

--------------------------------------
Specialized Enduro Comp 2015


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 12:14 pm 
User avatar
Posts: 5060
But then you'll lose the sweep and potetially cause hand pain. thats why i moved mine back.
go with what feels comfortable.

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 1:12 pm 
User avatar
Posts: 1266
Location: Ockendon
If you are happy with how they feel then stick with it... or make a small change and decide if you prefer it or not.

Don't focus on the markers unless you've been fitted for the bike and you want to stick to your prescription...

--------------------------------------
Strava Profile: http://goo.gl/iSl5I


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 5:21 pm 
User avatar
Posts: 1151
Location: Harold Wood
As said just make small adjustments at a time! I run that stem & bars (non carbon)


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 6:47 pm 
Posts: 217
Location: Saffron Walden
Only thing i would add is a mark to line up, or note down how you have them set up when you get them right for you. Then if you decide to do some maint or swap something that requires you removing or just moving your bars you can put them straight back.

--------------------------------------
GIANT TRANCE X 29er
BIRD AERIS


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 9:18 pm 
Posts: 1694
If it's a medium you have added 10mm to stem length and 10mm bar rise so it will feel different from your previous set up


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Mon Jan 26, 2015 9:32 pm 
Posts: 345
It's a large, so I have reduced stem length by 5mm and the rise change is unknown, I think the 'low rise' Spesh bars were 20 or 25mm? The Spesh specs are a little vague on the rise measurement, so I chose a Rethal bar that was in the same ball park visually.

I'm happy with my initial settings, but I will try small adjustments until I'm completely happy.

I was simply curious as to the setup markings on the stem and bars, but like everyone has mentioned, they are largely irrelevant if setup is judged more by feel and comfort and are there for reference only.

--------------------------------------
Specialized Enduro Comp 2015


Top
 Profile  
 
 Post subject: Re: Handlebar setup
PostPosted: Tue Jan 27, 2015 6:15 am 
Posts: 1694
Sounds good my low rise bars are 10mm and always good to shorten your stem for trail riding :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: