Forum


Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Headsets
PostPosted: Sat Feb 07, 2015 12:03 am 
User avatar
Posts: 1429
Quick question for a friend, he has got an on one 456 frame and want to fit a tappered fork, is this possible? From what i can see you can't as you need a 34mm external cup to fit in the fram but is tappered out for 44mm for the fork

http://www.gussetbikes.com/products-inf ... d=HDGUBE34
http://cdn.hopetechnology.netdna-cdn.co ... 011Web.pdf

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Sat Feb 07, 2015 12:44 pm 
Posts: 294
Can't you get an external cup that takes tapered? I'm sure I had something similar when I built the Stanton. Hope do mixtures of cups...

--------------------------------------
Stay loose


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Sat Feb 07, 2015 1:27 pm 
User avatar
Posts: 463
Location: In my shed
Hope pick n mix..!!

--------------------------------------
Stay on target...!!


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Sat Feb 07, 2015 2:51 pm 
User avatar
Posts: 740
Location: Cake shop
Seems you can with some forks depending on the frame size. STW thread http://singletrackworld.com/forum/topic/on-one-456-16-tapered-forks

Just in case you don't know the user brant used to be On Ones designer so I suppose he should know.


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Sun Feb 08, 2015 7:51 pm 
User avatar
Posts: 1429
tugger wrote:
Can't you get an external cup that takes tapered? I'm sure I had something similar when I built the Stanton. Hope do mixtures of cups...


That's what I want to get but there does not seem to be an external 1.5" lower cup option, just 1.1/8"

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Sun Feb 08, 2015 8:27 pm 
Posts: 14
Have you looked into getting it custom made? I don't know how important it is to you that it gets done but for such a small piece of metal work it wouldn't cost a lot to get it done by a metal worker.


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Mon Feb 09, 2015 11:49 am 
User avatar
Posts: 1429
If it comes to it I can make one at work but I just trying to make sure I'm not being a dunce and just can't see what I need

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Mon Feb 09, 2015 1:20 pm 
User avatar
Posts: 3548
Location: essex
Have you had a look at www.workscomponents.co.uk

--------------------------------------
Bike pics
www.pinkbike.com/u/nwmlarge/


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Mon Feb 09, 2015 2:11 pm 
User avatar
Posts: 1166
You need a ZS44 EC44 headset.
http://www.chainreactioncycles.com/cane ... prod115641 (or buy the whole Cane Creek 40).
Is it a 45650B or Carbon?


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Mon Feb 09, 2015 2:32 pm 
User avatar
Posts: 1429
Eccles wrote:
You need a ZS44 EC44 headset.
http://www.chainreactioncycles.com/cane ... prod115641 (or buy the whole Cane Creek 40).
Is it a 45650B or Carbon?

Not carbon or 650, old skool steel 26

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Mon Feb 09, 2015 3:50 pm 
User avatar
Posts: 1166
Ah that's a standard 1 1/8" straight steerer then. Same frame as mine so you can't fit tapered forks.


Top
 Profile  
 
 Post subject: Re: headsets
PostPosted: Thu Feb 11, 2016 10:30 pm 
Posts: 29
tugger wrote:
Can't you get an external cup that takes tapered? I'm sure I had something similar when I built the Stanton. Hope do mixtures of cups...

Ooooh, which Stanton did you build?
I have a Stanton too.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: