Forum


Post new topic Reply to topic  [ 33 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Sun Dec 01, 2013 6:51 pm 
User avatar
Posts: 1429
Right test the bike at thorndon, Danbury and swinley now, first off no chain coming off problem (one of my mates is running same set up but no guide and he's had no problems either). Gearing then, 32 works with out a problem but (and its a big but) its just not as efficient as a general rule. What I mean by this is on my other bike I am riding 39/26 crank and 36/11 cassette, in the 39 it is perfect for 80% of riding on flat, downhill and most local small hills (might be a grind at time but then I have got the granny to drop in to for longer and steeper section). On the flat (which there is lots in this park of the world) your legs have to put less effort in for one rotation than if I was running the 32. You basically spin the crank more with the 32 than with 2x10 set up.

As for the 42 sprocket, think this could work, still be able to climb but run a 34 or 36 up from to get the efficiently back. £100 though =(

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Sun Dec 01, 2013 7:19 pm 
User avatar
Posts: 1335
If you email the 42t company you can get 15 dollars off, 85 works out as 51 quid so not so bad.


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Sun Dec 01, 2013 7:44 pm 
User avatar
Posts: 1429
Other option

http://www.bikeradar.com/mtb/gear/categ ... -13-47548/

http://www.pinkbike.com/news/General-Le ... -2013.html

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Sun Dec 01, 2013 11:31 pm 
User avatar
Posts: 1335
Hhhmm. Cost is about double for the General lee one and reviews say its very worn after a few months, i did find a diy version whilst googling but looks like a bit if an abortion !


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 02, 2013 8:26 am 
User avatar
Posts: 2082
Location: Southend
Matt don't you think switching from 26 to 29 had also affected your gearing though hence the less effort on the flat

--------------------------------------
It doesn't matter what you ride


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Mon Dec 02, 2013 8:45 am 
User avatar
Posts: 5060
Exactly, makes a huge difference on gearing going from 26 to 29.

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re:
PostPosted: Mon Dec 02, 2013 9:23 am 
User avatar
Posts: 1429
unityjon wrote:
Matt don't you think switching from 26 to 29 had also affected your gearing though hence the less effort on the flat



Yes it would and from a full sus to a hardtail with less weight as well would make a big difference. Think you do need to taylor the gearing for the wheels as much as the terrian you are likely to use. Struggled at swinley a little with the steaper climbs at times but still got up.

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject:
PostPosted: Mon Dec 02, 2013 4:44 pm 
User avatar
Posts: 2082
Location: Southend
Increasing wheel size has the same effect as reducing the cassette size there's probably a formula for working it all out of you can be arsed

--------------------------------------
It doesn't matter what you ride


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Mon Dec 02, 2013 5:25 pm 
User avatar
Posts: 1335
Wheel Size x Pi x Waist Size x Number of days in the month / 8


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Tue Dec 03, 2013 9:34 am 
User avatar
Posts: 2082
Location: Southend
Thats the one

--------------------------------------
It doesn't matter what you ride


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Wed Dec 04, 2013 6:42 am 
User avatar
Posts: 690
Location: Stratford
I'm going for this chain ring narrow wide narrow rather than the single specific one as the chain may not be wide enough.
http://hispanoracing.com/catalogo/articulo/plato-rotor-q-ring-mtb-qx1-bcd76
32 or 34 teeth for 29" hard tail. That's the question

--------------------------------------
My sponsor in Spain
http://aplbike.com


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Wed Dec 04, 2013 7:28 am 
User avatar
Posts: 5060
Seen this?

http://www.bikeradar.com/mtb/news/artic ... ook-39168/

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re: From 2 x 10 to 1 x 10
PostPosted: Wed Dec 04, 2013 8:13 am 
User avatar
Posts: 1429
VW-surfbum wrote:


I'm looking in to one of them now, gearing is completly different with the bigger wheels, up more technical steep trails you will struggle to get the explosive power now

--------------------------------------
RAF spitfire PEDAL-WORX RACEING


Top
 Profile  
 
 Post subject:
PostPosted: Wed Dec 04, 2013 8:56 am 
User avatar
Posts: 5060
I'm running 2x10 on all my bikes but this does open another avenue of bikes im looking at, for instance the on-one codiene doesn't have capabilities to run a front mech :? They say it has 1x11 in mind?

--------------------------------------
Bike piccys!
http://tinyurl.com/okyhpdg


Top
 Profile  
 
 Post subject: Re:
PostPosted: Wed Dec 04, 2013 10:02 am 
User avatar
Posts: 2082
Location: Southend
VW-surfbum wrote:
I'm running 2x10 on all my bikes but this does open another avenue of bikes im looking at, for instance the on-one codiene doesn't have capabilities to run a front mech :? They say it has 1x11 in mind?



My bottlerocket doesnt have a mount like the codine doesnt, but that doesn't mean you cant..... ;) or am i missing something here :?:

--------------------------------------
It doesn't matter what you ride


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 33 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: